Multi-Wet Multi-530 Non-Oxidising Biocide for Cooling Systems, Range of Pack Sizes

Multi-Wet Multi-530 Non-Oxidising Biocide for Cooling Systems, Range of Pack Sizes

Product Code: PPS-MULTI-530

Multi-Wet Multi-530 is a non-ionic and low foaming glutaraldehyde based biocide proven to be highly effective against a broad spectrum of microbial growths that are often present in both aerobic and anaerobic conditions.

$POA
In Stock - Enquire about latest price
Vendor: Multi-Wet

Available

KEY FEATURES
  • Highly effective disinfectant suitable for use in cooling towers and industrial applications
  • Suitable for use across a wide pH range (typically 5-10)
  • Broad spectrum biological control, especially against Legionella species

 

Multi-Wet Multi-530 is a non-ionic and low foaming glutaraldehyde based biocide proven to be highly effective against a broad spectrum of microbial growths that are often present in both aerobic and anaerobic conditions. Multi-Wet Multi-530 is often used as a supplementary biocide to complement incumbent biocide programs, such as chlorine. Multi-Wet Multi-530 has been found to be highly effective against bacteria particularly Legionella, cyanobacteria and pseudomonas due to its potent microbial penetration ability.

In certain applications, Multi-Wet Multi-530 may be applied via a shot dose of 20 – 50 mL/m3 of system volume for ongoing microbial control. However, the optimum dosage for effective control will be dependent upon the type of system, its location, the microflora present and the severity of the problem. For a system “clean-up”, dosages in the range 50 – 100 mL/m3 should be used. These rates are indicative only and do not represent recommendations. The most suitable rate should be confirmed in consultation with a Parkway technician, prior to application.

The mode of action for Multi-Wet Multi-530 is based on a non-oxidising solution consisting predominantly of glutaraldehyde and is suitable in a large range of industrial applications including agriculture, food and beverage, paper, pharmaceutical and waste disposal industries.

Multi-530 is a proprietary chemical formulation that has been field-proven for more than a decade, in a range of applications by Multi-Wet, and is now supplied exclusively in Australia, by Parkway Process Solutions.

 

ADDITIONAL FEATURES
  • Assists in the treatment and prevention of biofilm
  • Primary mode of action is the disrupts of microbial cell growth mechanisms
  • Slow acting and does not gas off and can be slug-dosed weekly, as required

    APPLICATIONS

    Multi-Wet Multi-530 is suitable for use in a wide range of water treatment and disinfection related applications including:

    • Water treatment
    • Cooling towers
    • Condensers and other closed loop systems

      

    PRODUCT PACKAGE INCLUDES
    • Multi-Wet Multi-530 Non-Oxidising Biocide for Cooling Systems
    • Available in a range of pack sizes

     

      Brand Multi-Wet
      Product Name
      Multi-530
      Typical Pack Sizes 15, 200 & 1,000 Litre
      Typical pH 1 - 2
      Specific Gravity 1.02 - 1.06
      Primary Active Ingredient Glutaraldehyde
      Additional Active Ingredients Refer to Safety Data Sheet


      Application Rates Variable, depending on the specific application. For further details, consult a Parkway Process Solutions technician, to discuss your requirements.
      Poison Schedule S6
      Transport Hazard Class
      Class 8
      Chemwatch Hazard Alert Code 3
      Safety Related Information Refer to Safety Data Sheet

       

       

      The contents of this document are provided as a guide only and are subject to change without prior notice, and without any subsequent liability to Parkway Process Solutions Pty Ltd (the “Company”) or any of its related entities. The actual shape, colour, size, performance and/or any other parameters of the item/s and/or product/s and/or system/s supplied by the Company, may vary materially from those outlined by the Company.


      All brand names and product names outlined in this document are either trademarks or registered trademarks and belong to the respective companies.


      ALL INFORMATION OUTLINED HEREIN IS PROVIDED AS A GUIDE ONLY AND SHOULD NOT BE RELIED UPON FOR ANY PURPOSE, WITHOUT CONFIRMING SUCH DETAILS WITH THE COMPANY BEFORE MAKING A PURCHASE AND/OR UTILISING A GIVEN PRODUCT.


       

      SAFETY DATA SHEET (SDS) - MINI

      Safety related information for Multi-Wet Multi-530 Non-Oxidising Biocide, is outlined in the safety data sheet.

      DOWNLOAD

       

      SAFETY DATA SHEET (SDS) - FULL

      Safety related information for Multi-Wet Multi-530 Non-Oxidising Biocide, is outlined in the safety data sheet.

      DOWNLOAD

      KEY FEATURES
      • Highly effective disinfectant suitable for use in cooling towers and industrial applications
      • Suitable for use across a wide pH range (typically 5-10)
      • Broad spectrum biological control, especially against Legionella species

       

      Multi-Wet Multi-530 is a non-ionic and low foaming glutaraldehyde based biocide proven to be highly effective against a broad spectrum of microbial growths that are often present in both aerobic and anaerobic conditions. Multi-Wet Multi-530 is often used as a supplementary biocide to complement incumbent biocide programs, such as chlorine. Multi-Wet Multi-530 has been found to be highly effective against bacteria particularly Legionella, cyanobacteria and pseudomonas due to its potent microbial penetration ability.

      In certain applications, Multi-Wet Multi-530 may be applied via a shot dose of 20 – 50 mL/m3 of system volume for ongoing microbial control. However, the optimum dosage for effective control will be dependent upon the type of system, its location, the microflora present and the severity of the problem. For a system “clean-up”, dosages in the range 50 – 100 mL/m3 should be used. These rates are indicative only and do not represent recommendations. The most suitable rate should be confirmed in consultation with a Parkway technician, prior to application.

      The mode of action for Multi-Wet Multi-530 is based on a non-oxidising solution consisting predominantly of glutaraldehyde and is suitable in a large range of industrial applications including agriculture, food and beverage, paper, pharmaceutical and waste disposal industries.

      Multi-530 is a proprietary chemical formulation that has been field-proven for more than a decade, in a range of applications by Multi-Wet, and is now supplied exclusively in Australia, by Parkway Process Solutions.

       

      ADDITIONAL FEATURES
      • Assists in the treatment and prevention of biofilm
      • Primary mode of action is the disrupts of microbial cell growth mechanisms
      • Slow acting and does not gas off and can be slug-dosed weekly, as required

        APPLICATIONS

        Multi-Wet Multi-530 is suitable for use in a wide range of water treatment and disinfection related applications including:

        • Water treatment
        • Cooling towers
        • Condensers and other closed loop systems

          

        PRODUCT PACKAGE INCLUDES
        • Multi-Wet Multi-530 Non-Oxidising Biocide for Cooling Systems
        • Available in a range of pack sizes

         

          SPECIFICATIONS
          Brand Multi-Wet
          Product Name
          Multi-530
          Typical Pack Sizes 15, 200 & 1,000 Litre
          Typical pH 1 - 2
          Specific Gravity 1.02 - 1.06
          Primary Active Ingredient Glutaraldehyde
          Additional Active Ingredients Refer to Safety Data Sheet


          Application Rates Variable, depending on the specific application. For further details, consult a Parkway Process Solutions technician, to discuss your requirements.
          Poison Schedule S6
          Transport Hazard Class
          Class 8
          Chemwatch Hazard Alert Code 3
          Safety Related Information Refer to Safety Data Sheet

           

           

          The contents of this document are provided as a guide only and are subject to change without prior notice, and without any subsequent liability to Parkway Process Solutions Pty Ltd (the “Company”) or any of its related entities. The actual shape, colour, size, performance and/or any other parameters of the item/s and/or product/s and/or system/s supplied by the Company, may vary materially from those outlined by the Company.


          All brand names and product names outlined in this document are either trademarks or registered trademarks and belong to the respective companies.


          ALL INFORMATION OUTLINED HEREIN IS PROVIDED AS A GUIDE ONLY AND SHOULD NOT BE RELIED UPON FOR ANY PURPOSE, WITHOUT CONFIRMING SUCH DETAILS WITH THE COMPANY BEFORE MAKING A PURCHASE AND/OR UTILISING A GIVEN PRODUCT.


           

          ADDITIONAL RESOURCES
          SAFETY DATA SHEET (SDS) - MINI

          Safety related information for Multi-Wet Multi-530 Non-Oxidising Biocide, is outlined in the safety data sheet.

          DOWNLOAD

           

          SAFETY DATA SHEET (SDS) - FULL

          Safety related information for Multi-Wet Multi-530 Non-Oxidising Biocide, is outlined in the safety data sheet.

          DOWNLOAD

          Claritas est etiam processus dynamicus, qui sequitur mutationem consuetudium lectorum. Mirum est notare quam littera gothica, quam nunc putamus parum claram, anteposuerit litterarum formas humanitatis per seacula quarta decima et quinta decima. Eodem modo typi, qui nunc nobis videntur parum clari, fiant sollemnes in futurum.