Grundfos DID-1 Wall Mount Analyser & Controller with TI1-pH Sensor

Grundfos DID-1 Wall Mount Analyser & Controller with TI1-pH Sensor

Product Code: GRU-98915666

The Grundfos DID-1 System is designed for the measurement and control of up to 3 water quality parameters. The DID system with tank immersed sensor(s) is intended for monitoring and control of pH, ORP, conductivity and temperature (only pH sensor supplied).

$6,200.00 Excl. GST
$6,820.00 Incl. GST
In Stock - Enquire about delivery options
Vendor: Grundfos

Available

KEY FEATURES
  • Integrated measurement and control system provides versatile functionality
  • Up to 3 controller outputs
  • Suitable for integration with range of sensors including, pH, conductivity and ORP

 

The Grundfos DID-1 Wall Mount Analyser & Controller is designed for the measurement and control of up to 3 water quality parameters. The DID system with tank immersed sensor(s) is intended for monitoring and control of pH, ORP, conductivity and temperature (only pH sensor supplied).

The sensor(s) are placed directly in the tank or basin without the need for a bypass line and flow cell. The system is a kit for assembly on site and includes a control unit CU382, the water parameter sensor(s) with cable(s) to the control unit and tank immersion sensor holder(s).

 

The CU 382 control unit:

  • Intuitive plain-text operation
  • Data logger functionality (settings, calibration data and measured values)
  • Up to 3 controller outputs, freely assignable
  • Modbus (slave)
  • Modbus sensor interface
  • Data interchange with USB stick
  • Wide-range power supply

 

Water parameter sensors:

  • Modbus interface to CU 382 control unit
  • Onboard storage of calibration data
  • Temperature measurement and compensation included for all sensors
  • Pre-calibrated (pH, ORP, conductivity sensor)

 

Tank immersion sensor holder(s)

  • For use with site supplied pipe with OD. 50mm (DN40) or inch pipe with OD. 2"
  • Probe guard(s) to protect the sensor tips from damage
  • Prepared for add on of compressed air cleaning assembly

 

ADDITIONAL FEATURES
  • Intuitive plain text controller
  • Data logger functionality

 

APPLICATIONS
  • Commercial water disinfection
  • Drinking water treatment
  • Wastewater treatment

 

PRODUCT PACKAGE INCLUDES
  • Grundfos DID-1 Wall Mount Analyser & Controller
  • TI1-pH Sensor

 

    Brand Grundfos
    Gross Dimensions
    Weight  xxx g 
    Length xxx mm
    Width xxx mm
    Depth xxx mm
    Type Key DID-1 TI1-PH
    Preassembled Kit for completion on site
    Sensor installation type TI1 - Immersion armature for 1 sensor
    Cable length and type 7,5m, fixed on sensor(s)
    Sensor type sensor(s) with fix mounted cable
    Sensor 1 pH 0-14

     

    The contents of this document are provided as a guide only and are subject to change without prior notice, and without any subsequent liability to Parkway Process Solutions Pty Ltd (the “Company”) or any of its related entities. The actual shape, colour, size, performance and/or any other parameters of the item/s and/or product/s and/or system/s supplied by the Company, may vary materially from those outlined by the Company.


    All brand names and product names outlined in this document are either trademarks or registered trademarks and belong to the respective companies.


    ALL INFORMATION OUTLINED HEREIN IS PROVIDED AS A GUIDE ONLY AND SHOULD NOT BE RELIED UPON FOR ANY PURPOSE, WITHOUT CONFIRMING SUCH DETAILS WITH THE COMPANY BEFORE MAKING A PURCHASE AND/OR UTILISING A GIVEN PRODUCT.


     

    PRODUCT BROCHURE

    General information about the Grundfos DID-1 Wall Mount Analyser & Controller is outlined in the Grundfos DID - Dosing Instrumentation Digital brochure.

    DOWNLOAD

     

    PRODUCT INFORMATION SHEET (PIS)

    Detailed information about the Grundfos DID-1 Wall Mount Analyser & Controller is outlined in the Grundfos DID-1 Wall Mount Analyser & Controller product information sheet.

    DOWNLOAD


    USER MANUAL

    Additional information about operating the Grundfos DID-1 Wall Mount Analyser & Controller is outlined in the Grundfos DID-1 System, instruction manual.

    DOWNLOAD


    KEY FEATURES
    • Integrated measurement and control system provides versatile functionality
    • Up to 3 controller outputs
    • Suitable for integration with range of sensors including, pH, conductivity and ORP

     

    The Grundfos DID-1 Wall Mount Analyser & Controller is designed for the measurement and control of up to 3 water quality parameters. The DID system with tank immersed sensor(s) is intended for monitoring and control of pH, ORP, conductivity and temperature (only pH sensor supplied).

    The sensor(s) are placed directly in the tank or basin without the need for a bypass line and flow cell. The system is a kit for assembly on site and includes a control unit CU382, the water parameter sensor(s) with cable(s) to the control unit and tank immersion sensor holder(s).

     

    The CU 382 control unit:

    • Intuitive plain-text operation
    • Data logger functionality (settings, calibration data and measured values)
    • Up to 3 controller outputs, freely assignable
    • Modbus (slave)
    • Modbus sensor interface
    • Data interchange with USB stick
    • Wide-range power supply

     

    Water parameter sensors:

    • Modbus interface to CU 382 control unit
    • Onboard storage of calibration data
    • Temperature measurement and compensation included for all sensors
    • Pre-calibrated (pH, ORP, conductivity sensor)

     

    Tank immersion sensor holder(s)

    • For use with site supplied pipe with OD. 50mm (DN40) or inch pipe with OD. 2"
    • Probe guard(s) to protect the sensor tips from damage
    • Prepared for add on of compressed air cleaning assembly

     

    ADDITIONAL FEATURES
    • Intuitive plain text controller
    • Data logger functionality

     

    APPLICATIONS
    • Commercial water disinfection
    • Drinking water treatment
    • Wastewater treatment

     

    PRODUCT PACKAGE INCLUDES
    • Grundfos DID-1 Wall Mount Analyser & Controller
    • TI1-pH Sensor

     

      SPECIFICATIONS
      Brand Grundfos
      Gross Dimensions
      Weight  xxx g 
      Length xxx mm
      Width xxx mm
      Depth xxx mm
      Type Key DID-1 TI1-PH
      Preassembled Kit for completion on site
      Sensor installation type TI1 - Immersion armature for 1 sensor
      Cable length and type 7,5m, fixed on sensor(s)
      Sensor type sensor(s) with fix mounted cable
      Sensor 1 pH 0-14

       

      The contents of this document are provided as a guide only and are subject to change without prior notice, and without any subsequent liability to Parkway Process Solutions Pty Ltd (the “Company”) or any of its related entities. The actual shape, colour, size, performance and/or any other parameters of the item/s and/or product/s and/or system/s supplied by the Company, may vary materially from those outlined by the Company.


      All brand names and product names outlined in this document are either trademarks or registered trademarks and belong to the respective companies.


      ALL INFORMATION OUTLINED HEREIN IS PROVIDED AS A GUIDE ONLY AND SHOULD NOT BE RELIED UPON FOR ANY PURPOSE, WITHOUT CONFIRMING SUCH DETAILS WITH THE COMPANY BEFORE MAKING A PURCHASE AND/OR UTILISING A GIVEN PRODUCT.


       

      ADDITIONAL RESOURCES
      PRODUCT BROCHURE

      General information about the Grundfos DID-1 Wall Mount Analyser & Controller is outlined in the Grundfos DID - Dosing Instrumentation Digital brochure.

      DOWNLOAD

       

      PRODUCT INFORMATION SHEET (PIS)

      Detailed information about the Grundfos DID-1 Wall Mount Analyser & Controller is outlined in the Grundfos DID-1 Wall Mount Analyser & Controller product information sheet.

      DOWNLOAD


      USER MANUAL

      Additional information about operating the Grundfos DID-1 Wall Mount Analyser & Controller is outlined in the Grundfos DID-1 System, instruction manual.

      DOWNLOAD


      Claritas est etiam processus dynamicus, qui sequitur mutationem consuetudium lectorum. Mirum est notare quam littera gothica, quam nunc putamus parum claram, anteposuerit litterarum formas humanitatis per seacula quarta decima et quinta decima. Eodem modo typi, qui nunc nobis videntur parum clari, fiant sollemnes in futurum.